|
4G Cat1 works with NEO/NEO Core/NEO Air+Ubuntu: Hardware platform: NanoPi NEO/ NEO Core 4G Cat.1 Software Platform: friendlycore-focal Image file: h3_sd_friendlycore-focal_4.14_armhf_20210618.img NanoPi NEO/ NEO connects to a PC through a serial port. Open the serial tool,use the nano in the/etc/resolv.conf file add "nameserver 8.8.8.8" 
Enter ifconfig and you can see that 4G is recognized as enx..
The identification results of NEO/NEO Core/NEO Air are the same. |
|
本帖最后由 Mcuzone_WXJ 于 2023-9-6 11:00 编辑 4G Cat1 works with NEO Air+Debian: Hardware platform: NanoPi NEO Air 4G Cat.1 Software Platform: friendlycore-xenial Image file: h3_sd_friendlycore-xenial_4.14_armhf_20210618.img NanoPi NEO/ NEO connects to a PC through a serial port. Open the serial port tool and enter ifconfig. You can see that 4G is identified as eth1 but has no IP address. In root mode, enter "udhcpc -i eth0" to obtain the IP address.
|
|
本帖最后由 Mcuzone_WXJ 于 2023-9-6 10:42 编辑 4G Cat1 works with NEO/NEO Core+Debian: Hardware platform: NanoPi NEO/ NEO Core 4G Cat.1 Software Platform: friendlycore-xenial Image file: h3_sd_friendlycore-xenial_4.14_armhf_20210618.img NanoPi NEO/ NEO connects to a PC through a serial port. Open the serial port tool and enter ifconfig. You can see that 4G is identified as eth1 but has no IP address. In root mode, enter "udhcpc -i eth1" to obtain the IP address. The identification results of NEO and NEO Core are the same.
|
|
Usage with Debian: |
组图打开中，请稍候......
收藏
